Clean Technologies and Environmental Management
AB Embedded Systems engineers solutions in the oil and gas sector deploying total control systems they design and also manufacture. These include high-performance, high-efficiency systems, designed for an all-weather environment where 100 percent reliability and controlled low power consumption are essential.”
Absolute Completion Technologies Ltd. is an engineering, design and manufacturing company focused on the development, analysis, design and construction of down hole sand control and flow control technologies and have developed innovative erosion control and specialized well completion products. The company has research projects at various stages looking at “drill-in” and low disturbance practices, in-situ upgrading, intelligent screen and operations in very severe reservoir environments. Absolute was created in 2007 following an agreement with Schlumberger to effectively commercialize and broaden the technical and market applications for Absolute’s unique sand control and flow control technologies. Schlumberger is now a majority investor in the company.
Acceleware is an innovator of clean-tech enhanced heavy oil recovery technology and a developer of software solutions for the oil industry. They are comprised of two business units: Radio Frequency (RF) heating; and Seismic Imaging Software.
Access Renewable Energy Ltd. is an independent renewable energy consultancy and project developer. The company provides comprehensive, objective and practical project development services with core competencies in: site assessments & feasibility studies, planning & design, project development & project management, environmental & regulatory approvals, implementation and due diligence. Access provides expert services to a wide variety of clients including independent power producers, governments, business, utilities and commercial enterprises around the world the small hydro, hydro- kinetic, wind and solar energy sectors.
ACL Manufacturing is an industry leader in the design and fabrication of industrial burner / burner management systems; high efficiency/low NoX Burners, and flare-stack/incinerator ignition systems. ACL also provides custom systems for all types of burner applications which provide safe and reliable ignition and control solutions.
Acme is an integrated manufacturer, encompassing mechanical, electrical and electronic manufacturing capabilities within the same company. Acme Engineering manufactures three distinct product lines: Gas detection systems for building ventilation control, process heating equipment for large commercial and industrial applications, and automatic scraper-strainers for intake, process and effluent filtration.
Ages’ patented thermal desorption technology enables them to safely remove liability, costs and contaminants while creating a niche oil revenue with enhanced environmental and public approval.
Agora Energy Technologies Ltd. is an innovative electrochemical engineering company that provides solutions for the next generation of energy technologies. They develop ground-breaking battery technology package that directly utilizes the industrially captured CO2and generates electricity. By doing this they enable efficient integration of clean energy at grid and micro-grid levels.
Airex Industries Inc. offers customized energy efficient air handling designs and solutions for industrial and commercial clients worldwide. The company provides expertise in ventilation, airborne contaminants, temperature control, humidity, building automation and control systems, energy recovery and general air filtration and has developed a range of unique products that enable companies in various industries to significantly reduce their energy consumption.
Altech Technology Systems Inc. designs, manufactures, and installs innovative industrial air pollution control and wastewater treatment solutions for tough environmental problems. Products include Reither venturi wet air scrubber, patented high efficiency air abatement for PM 2.5, aerosols, acid fumes and many toxic odorous gases. The company’s HydroKleen membrane bioreactor wastewater treatment for high BOD and TSS meets sewer discharge limits and water recycling.
AMR Process has grown to a recognized International Oil & Gas Process Package & Technology company, with experience in Onshore, Offshore, Sweet, Sour & Cold Weather designs & applications. As well as providing Process Package Solutions to meet their clients’ exact requirements.
Aqua Pure develops, manufactures, and operates water filtration solutions for industrial applications. The company has developed the PROH2O® system, a fully automated process equipped with advanced components meeting environment, health, and safety demands. Their PROH2O® units are exclusively patented in Canada, and around the globe.
Aquistore is an independent research and monitoring project which will serve as the storage site for the world’s first commercial post–combustion CO2 capture, transportation, utilization, and storage project from a coal–fired electrical generating station (Boundary Dam CCS Project).
Arolytics is a software and expert services company that specializes in emissions management and regulatory compliance for the energy sector. The Arolytics team has extensive experience analyzing large emissions datasets and working with methane measurement technologies through collaborative projects with industry, government, and NGOs.
ASDR Environnement specializes in environmental solutions by ensuring the management and treatment of wastewater and sludge of all kinds, specializing in the design of water treatment units and dredging, dewatering and disposal of waste sludge using geosynthetic membranes.
Aspin Kemp & Associates Inc. (AKA) is a systems integrator and engineering company delivering innovative solutions to island and microgrid power system. AKA designs, manufactures, and supports power and propulsion assets for marine, Offshore O&G, and land-based industries.
Associated Engineering provides consulting engineering services specializing in the water, transportation, infrastructure and environmental sectors. Their multi–disciplinary team is experienced in identifying cost effective energy efficiency measures in a plant, building or process. Energy efficiency services are provided in the areas of: water and wastewater treatment, industrial process design, water distribution systems, pump design and application, plant operation, boilers, industrial control systems, integrated building control systems, HVAC, new and retrofit construction, motors and drives and lighting. Associated Engineering has participated in world–class projects for both public and private sector clients in Canada and around the world.
Atlantic Research Labs is focused on opportunities for industrial burners, incinerators and are currently refining a series of next generation jet combustors for use in treatment of waste gas in the energy sectors.
Atlantic Soils is a fully permitted Petroleum Impacted Soil Remediation Facility. The main objective of the company is to provide an environmentally friendly method of remediation of petroleum impacted soil under a controlled environment for a better tomorrow.
The Quebec company Audace Technologies Inc. offers innovative solutions for clean and sustainable electricity generation from renewable energies.
Baleen technology application and solutions, for any industry, includes a self-cleaning, water management solution that creates opportunities and value for customers where before there was only waste.
BC Research is a leading innovation centre, specializing in the incubation and commercialization of emerging technologies. Services include experimental research, process development, pilot plant design, construction and operation, mechanical and material process engineering consulting, and laboratory analysis and testing. Their process engineering projects have included hydrogen research and production. BC Research has forged key alliances and partnerships with NORAM Engineering and Constructors Ltd., Axton Inc., Kemetco Research Inc. and Electrosynthesis.
Berg Chilling Systems designs, manufactures, installs and services thermal process control systems for a broad range of industries and specialized applications worldwide. Berg Chilling Systems custom designs, manufactures, tests and integrates a wide range of skid mounted industrial process refrigeration equipment, mechanical packages and fluid pumping systems.
Bestech offers multi–disciplinary engineering, automation, IT/IS, power systems, energy management and environmental monitoring services. Although Bestech specializes in the mining industry, the company also serves clients in other industries including pulp and paper, forestry, oil and gas, automotive, manufacturing, municipal, commercial and industrial sectors. Bestech offers innovative solutions that enable mining operations to increase efficiency, reduce energy costs and enhance worker safety.